FB 2/3 - 3D Printers; Shoody Medallions -
- Thread starter Ca Ira
- Start date
-
Intermittent Denial of Service attack is causing downtime. Looks like a kiddie 5 min rental. Looking into some solutions.
- Status
Inb4 Christine buys a 3D printer, breaks it day one business gone bye bye...
Chris has made a shoody post to go with his shoody medallions. I rate it Blow Standard.
He should get a can of reeB with his side of salty.
I will give Chris credit that one or two of those people that said his work were weens, but at the same time, considering I've read multiple accounts that people's medallions arrived still wet, and the whole Pumpkin Swirl incident where Chris thought it appropriate to vandalize someone's purchased item and also spit on the certificate, I think needs to Happy Dippy Derpy thankful eBay is still letting him sell anything at all.
Also, I doubt he will be buying a 3d printer. He doesn't have willpower to save up that kind of money instead of wasting it on toys, nor do I believe any of his credit cards have enough available credit on them that he could purchase it.
Also, I doubt he will be buying a 3d printer. He doesn't have willpower to save up that kind of money instead of wasting it on toys, nor do I believe any of his credit cards have enough available credit on them that he could purchase it.
What kind of assholes buy medallions from Chris and expects them to have some kind of quality in their construction? I understand people buy them to be ironic and patronizing but it's not like he has any real skill or talent. If you feel like you wasted your money buying a medallion from Chris, it's your own fault.
Closing in on a whole full year of this as a gig and he still can't stop the passive aggressive sniping at his customer base while he drowns in all that fresh LEGO/DLC for games he'll never play. It's like he's incapable of learning or changing for the better for some reason . . .
^This. I think the great majority of the complaints about his medallions quality are filed by people just looking to give him a hard time. I don't know why anyone would think they'd be nice Etsy quality jewelry and I would think the crappy quality would just make it more "Chris" to those who bought them.
People just expect him to put the same level of effort into them as he did with his own. They're about 1/3rd the size of his original. He obviously hastily puts them together. They are falling apart and tenuously held together in the unboxing videos. He really needs to do a better job. His product is pretty subpar, given this is all he does all day, I expect just a little more effort. "hand made" doesn't mean shit if its done poorly and you can't even keep your shedding balding hair out of it.
He put more effort into making these a statement of his gender revelations, than actual functional products.
He put more effort into making these a statement of his gender revelations, than actual functional products.
Last edited:
Why would we want him to be able to list more than 20 medals at a time, when that was the direct cause of his "shoody" work in the first place? He made all those still-wet garbage medallions because he was in a rush to fill so many orders.
Last time Chris assumed people would "let bygones be bygones" it didn't work out so well for him.
When Chris talked about plastic stuff made with a 3D printer, is he making a subtle reference to that 3D-printed "Lolcow of the Year" trophy he supposedly got?
Last edited:
Especially since 3D printers tend to run a couple grand. Maybe about. . .four months' tugboat?
But no, if he used a 3D printer, they wouldn't be fresh, hand-crafted, TRUE & HONEST medallions. They wouldn't have character. Or contain errant Tomgirl hair.
Pretty sure he just misspelled "shoddy."
Last edited by a moderator:
Gothicserpent
kiwifarms.net
He's totally going to buy a 3D printer, isn't he?
But 3D printers don't accept CRAYOLA FUCKING MODEL MAGIC.
Nobody's going to complain to eBay that your seller status should be higher, Chris. Nor would eBay give a rat's ass if they did.
I think these "rise up, my minions!" posts are the most ridiculous. Even more ridiculous than when Chris tries to sic advocacy groups like HRC on the dang dirty trolls.
I think these "rise up, my minions!" posts are the most ridiculous. Even more ridiculous than when Chris tries to sic advocacy groups like HRC on the dang dirty trolls.
2 words: Infinite Lego®.
Really though, since 3D-printed ones wouldn't be TRUE and HONEST (and probably illegal because counterfeit), I don't see Chris 3D-printing shoody blow standard bricks on his own.
Last edited:
I don't see a 3d printer in his future. While there are some models below $1000, making it possibly within his reach, he wouldn't want to save up. Add that to the fact that his household computers are ancient and in horrible states of repair, he would have nothing to run the damn thing.
I think this is analogous to how he disliked Asperchu being made on a tablet, insisting that even tough Asperchu's technique was better, his art was superior by virtue of being hand drawn.
I think this is analogous to how he disliked Asperchu being made on a tablet, insisting that even tough Asperchu's technique was better, his art was superior by virtue of being hand drawn.
- Status
Similar threads
- Locked
3/2 - Chris bought toys afterwards
- Locked
- Poll
